News

According to the "Automotive Industry Report 2009", if the maximum value of the international competitiveness of the developed country's auto industry is set to 100, the Chinese auto industry's international competitiveness score in 2007 was only 52.83, an increase of 10.9% year-on-year. If only compared with the most developed Germany in the automotive industry, the German automotive industry's international competitiveness score was 81.16 in 2007, while China's score was 51.10, which is only 63% of the German score. Although as of the first half of this year, China deserved to become the world`s largest auto consumption power, the overall level of China`s auto industry`s international competitiveness still remains a big gap with the developed countries. After achieving high growth rates of nearly 50% and over 32% in 2009 and 2010, respectively, in the first quarter of 2011, the growth rate of China's light vehicle sales fell sharply to 9%, while the growth rate in April fell to 3%. The introduction of government stimulus policies and the implementation of new car restriction policies in major cities have made the Chinese auto market lack of growth.

The 5th Shanghai International Auto Parts & Maintenance Equipment Exhibition Time: October 19-22, 2004 Location: Shanghai International Exhibition Center Shanghai International Auto Parts Exhibition, from Shanghai International Auto Show. It was born in 1996 - one of the earliest professional auto parts exhibitions in China. After nearly 10 years of constant exploration and development, combined with the present and future needs of the development of China and the international automotive industry, it is independent of the Shanghai International Auto Show, emphasizing internationalization. On the basis of professionalization and regularization, it will serve as a platform for procurement and export in the Asia Pacific region of the automobile and auto parts industries, and will further lead the future of the industry. In the previous exhibition, there were about 650 component manufacturers from 20 international regions. Among them, 200 overseas component companies accounted for 30.77%; there were 150,000 visitors. There are 29 countries/regions; Asia accounts for 79%; America accounts for 7%, Europe accounts for 5.7%; other accounts for 8.3%. Among them, 69,000 were professional visitors, accounting for 46% of the total number of viewers. Among them, 42% understood market information, 19% saw samples, 11% sought suppliers, 8% agents sought agents, 7% visited customers, and 13% others. Participate in the four highlights of the New Global Pavilion 1. New World has been hosting or representing domestic and international large-scale exhibitions related to the automotive industry over the years, with good professional exhibition experience. 2. New Global currently represents tens of thousands of automotive-related products at home and abroad, with customers in all provinces and cities; signing up for the 5th International Auto Parts & Components Maintenance and Repair Equipment Exhibition - The New Global Pavilion can give priority to becoming a new global supplier. 3. China Automotive Supplies Network has always occupied a leading position in the industry website. Daily page views can reach more than 30,000 visitors. Registration for the New Global Pavilion can be advertised on the Chinese car supplies online discount (or free). 4. The new global pavilion can handle the production and design of booths; the airline tickets and hotels can be set on behalf of the delegation; the translators can be provided and the exhibits can be transported on behalf of the exhibitor. The New Global Pavilion warmly invites domestic and foreign automotive industry and friends from related industries to attend and visit the Fifth International Auto Parts & Maintenance Equipment Exhibition. Exhibits: This Auto Parts Exhibition, for the first time, establishes an international auto parts procurement region as required. (500 square meters), and according to the need to set up tires. Audio. Auto maintenance. Auto supplies four independent exhibition area for exhibitors to exchange and visitors. ★ Automotive parts: engine systems, electrical and electronic systems, transmissions, exhaust pipes, axles, steering, brakes, suspension systems, bodywork and accessories. ★ Automotive accessories: automotive interior components, automotive air conditioning, automotive and navigation communication systems, automotive security and anti-theft systems. ★ Automobile tires exhibition area (including various wheels). ★ Car audio and audio-visual equipment exhibition area ★ Automotive repair and testing equipment. ★ Automotive Maintenance Products Exhibition Area ★ Automotive-related technologies and manufacturing equipment (including books, computer software/network management, etc.). ★ International auto parts procurement area.

This phenomenon is also applicable to other tire brands. We see that the Michelin XM2 pattern with a specification of 205/55R16 has a minimum price of 469 yuan after promotion. (5 yuan for 509 yuan and 200 yuan for 2399 yuan) The average price of each item was calculated.) The wholesale price of the Michelin XM2 with the same specifications was about 490 yuan. At present, in the automotive aftermarket supply chain, basically half is controlled by the OEM and the 4S shop, and the other half is supplied by the auto parts city scattered in various cities, creating two major pain points in the automotive aftermarket, [monopolistic profits" and [counterfeiting" "The two major forces have symbiotically co-prospered for more than 20 years in the ravages of illness. Now it is time for this change. For example, as early as June 2015, a consumer (auto repair factory owner) bought 99 barrels of [Malaysia" version of Shell Lubricant through JD`s own [global purchase". After receiving the goods, he discovered that the place of production was Hong Kong.

From April 21 to 29, the 13th Beijing International Automobile Exhibition (hereinafter referred to as [Beijing Auto Show") will be held as scheduled in the new hall and old hall of the China International Exhibition Center in Beijing. It is reported that more than 2,000 vehicle and component companies from 14 countries and regions participated in the Beijing Auto Show this year. What do you think of when talking about auto show? Is the new car release or star, supermodel help, crowded exhibition hall? All of this is true. The annual auto show is not only a good opportunity for the launch of new cars and corporate branding, but also a time for the display of new products and new technologies. All previous auto shows have become the vanes to lead new products and new technologies. If you say new technologies and new products, then the spare parts companies exhibition area is essential. What new technologies will be exhibited at the Beijing Auto Show this year. How should the parts and components exhibit? Components Pavilion to see how the theme <br> <br> Beijing Auto Show is "to make the car better future." To make the future better is to rely on more new technologies and ideas. In this year's Auto Show, domestic and foreign parts and components companies providing advanced technology will be present at the show. It is reported that this year's Beijing auto show parts exhibition area of 70,000 square meters. This year, some parts and components companies will participate in the new exhibition of the China International Exhibition Center together with the vehicle companies. From the current exhibiting information, Matsushita Electric Motors, Hangsheng Electronics, All Resistant Plastics, NTN, NSK, BorgWarner, Fast are in the W2-W Zone; LG Group, Toyota Textile, Marelli, Aisin, Hitachi, and Electric Equipment, Czech Teget, and other companies in the W1-W exhibition area. The old museum is still the "main battlefield" of parts and components companies. In addition to exhibiting automotive drivers and chassis, body and accessories, automotive supplies, and auto maintenance products, the Electronics and Electrical Appliances Zone and the New Energy Expo have also been established. In addition, it has also attracted participation from relevant companies in the car networking industry to comply with the development trend of smart cars, and will fully demonstrate the overall level of development of China's parts and components companies, technological research and development achievements, and the future development direction of green automotive technologies. Components Pavilion to see what this year's Beijing Auto Show <br> <br> parts exhibition highlights and what it? It is reported that in addition to the annual auto parts and auto parts display, the Beijing Auto Show this year also boasts the latest technologies and products for new energy applications, safe driving, and automotive interconnection. In recent years, active safety technology has become a field in which many vehicle companies and parts and components companies have focused their efforts. At this year's Beijing Auto Show, Bosch, Denso, Hitachi and other companies have brought active safety technology-related products, respectively; in terms of new materials, Toyota Textile has exhibited lightweight automotive interior parts and seating products made from foam materials. In terms of energy-saving and emission-reduction technologies, Bosch, Denso, BorgWarner and other companies have brought optimization products for gas distribution and fuel supply systems. In addition, tire companies also exhibited tire products with low roll resistance and low energy consumption, such as the BluEarth series from Yokohama. Parts enterprises are divided <br> <br> I contacted several parts enterprises to understand what this year will show new products, new technologies bring. At the same time, many parts and components companies also expressed their views on the annual auto show. Says "a thousand Hamlets in the eyes of a thousand readers." Similarly for the auto show, the various parts and components companies are not the same. Different from the Shanghai Auto Show, the Beijing Auto Show arranged the exhibition area of the parts and components companies in the old building of the China International Exhibition Center in the urban area instead of arranging with the entire vehicle exhibition area. For such arrangements, parts and components companies have different views. Some companies [like it" for such arrangements, and some companies have expressed their desire to arrange with the entire vehicle area. Some companies stated that such an arrangement would help distinguish the exhibitors. This would be more conducive to the role of the auto show. The so-called "outsiders look at the whole vehicle and the insider looks at the parts." Companies that want to arrange with the vehicle exhibition area think that the auto show separating the two places is more or less inconvenient. One auto show once a year, N parts exhibitions one year. For parts and components companies, which ones to participate in and which ones do not participate is a problem. How to choose the scale, influence and professionalism of the exhibition, and various parts and components companies also have their own ideas. For companies that are "not bad", their choice is "no one less." However, subject to the constraints of budget, geographical and other factors, some companies have to think twice before going ahead, either by differentiating their scale of participation or participating in another year. There is no doubt that the influence of the auto show has been increasing year by year. Stars and supermodels have helped the annual auto show to continuously increase in propaganda and influence. Many visitors are looking forward to the [Mushen" and [Goddess" in the hearts of auto shows. . However, for the parts and components companies, it does not seem to have much effect on whether the stars have come to the auto show. Some companies are of the view that the help of the stars to help the entire vehicle exhibition area can also indirectly drive the popularity of the parts exhibition area, some companies believe that the auto show business atmosphere should not be too strong, after all, the origin of the auto show is the car and parts exhibits.

In June of this year, China Automotive Evaluation and Research Institute hosted the world's top ten transmission selection activities. The results of the recent selection were officially announced. Great Wall, Volkswagen, Mercedes-Benz, SAIC, Honda, GM, Buick and other vehicle transmission transmission system were on the list. Domestic research on the three major components lags far behind overseas automakers, and the Great Wall is not the first to develop the gearbox. As early as 2011, BYD has already equipped the self-developed dry dual-clutch gearbox 6DT25. In the later launch of the s7, the self-developed wet dual-clutch gearbox 6DT35 was first introduced. The 7DCT450 wet dual-clutch gearbox independently developed by the Great Wall Auto Parts is not too bad in terms of parameters. The maximum torque of 450 Nm is higher than most of its own brands, but there is no overspeed gear and the side shows the Great Wall 2.0. t engine auto parts low twist is really very weak, can only rely on deceleration and twist to ensure a certain torque output. And does this 7DCT gearbox reach the first-class level of the current joint venture brand? Still look at the actual application. According to the organizer, the selection criteria can be attributed to three points: for the industry, the market and the consumers, the gearbox with high degree of attention and high importance; in the comprehensive evaluation of the [advanced gearbox", the results are excellent. The performance of the same type of opponent is outstanding; the transmission has special performance and special performance.

China Automobile Parts Holdings Ltd (CAP) and Protev Asia Ltd. (Protev), which are listed on the Malaysian side, signed a memorandum of understanding on the sale of spare parts On August 28th,. Looking ahead, the two companies are interested in setting up joint ventures, Protev is primarily responsible for operations and product sales, and CAP is primarily responsible for product development. Under the cooperation project, CAP can also help Protev improve its service capabilities, not just its original Some provide plastic work and technical support to customers; at the same time, Protev will use its extensive distribution network to open the European spare parts sales market for CAP, and may even expand to the Central and South American market.

First, the reorganization and merger of parts and components companies has achieved initial results. The socialization and specialization of parts and components production have been rapidly developed, and a new industry structure has been formed under the diversified capital structure of orderly utilization of foreign capital, improvement of the operating environment of private capital, and promotion of the benefits of state-owned enterprises. State-owned enterprises are mainly supporting systems that have been formed in the past. They are mainly based on internal support. They have begun to try to jump out of the supporting scope of the original enterprise groups and expand new space for development. Foreign-funded parts and components companies have high levels of operation and management, advanced product technologies, and have an original matching relationship with multinationals' entire vehicles, showing strong competitiveness. Second, Chinese auto parts have become an important part of world purchasing. Global procurement of parts and components has become a shortcut for auto manufacturers to increase production efficiency and competitiveness. According to the statistics of the Ministry of Commerce, in the wave of global procurement, China's auto parts exports have developed rapidly. Products began to enter the OEM market from the aftermarket accessory market and began to shift from low-value-added products to high-value-added products. Third, the rapid development of China's auto parts industry, the rapid increase in total indicators. In recent years, the total vehicle sales revenue of automotive OEMs has increased by an average of 28.75% annually, while the sales of auto parts and components companies have increased by an average of 36.82% annually, which is higher than the average level of the industry. Fourth, China's own brand of auto parts is in the market's rising period. For example, the ACTECO engine with independent intellectual property rights developed by Chery has become the first "Chinese core" of China's sedan engine; Geely has also fully equipped the vehicle modelling, body, chassis, auto accessories, engine, transmission, and vehicle electronics. Inlaid pistons and other parts and components with independent intellectual property rights. The independent brands and technological innovation of the vehicle require components as the basis, and the independent innovation of components and parts will have a powerful driving force for the development of the entire vehicle industry. Fifth, the clustering effect of auto parts production is present. Divided by region, there are now six major component regions such as the Northeast, Beijing-Tianjin, Central China, Southwest, Yangtze River Delta, and Pearl River Delta. The clustering of auto parts industry can make division of labor more elaborate and more professional, and it is easier to realize large-scale, informatization, and rapid production logistics management, and significantly increase economic efficiency. At present, the main problem of clustering is to prevent simple gatherings and aggregations, and to pursue excessive scale effects. It is necessary to strengthen the government's management functions, through comprehensive and rational planning, and to transition to real industrial clusters to improve the level and effectiveness of the cluster.

Shanghai-Chongqing Cooperates to Develop the Vitality of Auto Parts Market in Southwest Chin To build the exhibition platform of Yangtze River Economic Zone, Chongqing International Auto Parts and Service Exhibition 2018 (CAPE 2018) is taking place at Chongqing International Expo Center from September 19 to 21, 2018. The event is jointly organized by the China Council for the Promotion of International Trade Shanghai Sub-Council (CCPIT Shanghai), the China Council for the Promotion of International Trade, Automotive Industry Committee (CCPIT Auto), The Society of Automotive Engineers of China (SAE China) and Shanghai International Exhibition Co., Ltd., and is co-organized by Chongqing Huyu International Exhibition Co., Ltd. The Tangible Results of Shanghai-Chongqing Cooperation & The Great Potential of Auto Parts Market in SouthwestChina Chongqing, as the largest auto production hub, has formed a large-scale automotive manufacture and R&D cluster. There are over 400 high-quality Tier 1 auto parts production enterprises and over 500 Tier 2 and Tier 3 supporting enterprises in this city. The localization ratio of auto parts has reached 80%. In the aspect of new energy vehicles and automotive intelligent connectivity, Chongqing also successively built an intelligent connected vehicle pilot zone and an intelligent vehicle town. All the facts above reveal the essential role that Chongqing automobile market plays in southwest China as well as the great potential of Chongqing in the auto parts market. As the first delivered exhibition project of Shanghai-Chongqing cooperation, CAPE 2018 has attracted the participation of nearly 200 domestic and international renowned automobile and auto parts enterprises from 8 countries and regions and reached 15,000m2 in scale due to the substantial automotive-related resources of Auto Shanghai and the unique venue advantages of Chongqing International Expo Center. CAPE 2018 is designed to be the first high-end auto parts promotion and exchange platform in the southwestern region of China. Auto Parts Enterprises Gathering Ignite Industrial Upgrading with Advancing Technology The exhibition has attracted the full participation of a large number of prestigious Chinese and international leading Tier 1 and Tier 2 auto parts manufacturers, including ADD Industry Zhejiang, Adient, Aisin Seiki, BorgWarner, Bosch, Bridgestone, Dana Incorporated, Denso, Fastgear, Faurecia, Hitachi Automotive Systems, Honsel, MITSUBA Corporation, NSK, NTN, Plastic Omnium, Ruili Group, Valeo, Webasto, Yanfeng Automotive Trims Systems and ZF. The exhibitors are showcasing their latest products and technologies, including automated driving, intelligent connectivity and engine technologies, in-vehicle radar applications, integrated seating systems, powertrain systems and chassis technology, emission control technology, transmissions, and braking and stability control systems. It can be foreseen that exploring the market potential in southwest China will help auto parts suppliers create value in the long run. The auto parts subsidiaries of Chinese automotive brands, including BYD, Changan Automobile, Geely Holding, Great Wall Motors, JAC Motors, Yema Auto and Zotye Auto, are also participating in the exhibition. Depending on their industry base in Chongqing and the surrounding areas, they are showcasing their creative mobility solutions including technology for new energy vehicles, automated driving and connected cars. Brilliant Concurrent Events for Networking and Exchange of Latest Information

[At present, the prices of spare parts for 4S shops in the urban areas have not changed significantly. Several car dealers have said that they have not yet received notifications that automobile manufacturers need to increase spare parts prices, and they have not changed from the point of view of manufacturers` purchase prices. In the short term, it is unlikely that prices will generally rise." Rising steel prices, rising aluminum prices, and rising oil prices. In the case of general price increases for auto parts production materials, the reporter recently visited some of the city's auto repair shops and spare parts sellers, and learned about the recent auto repair factory and auto parts. The prices of spare parts in stores have been rising all the way. Most of the spare parts have risen by 10%, and some even exceed 50%. On the afternoon of the 17th, the owner of the car, Mr. Wang, discovered that compared with the previous purchase price of 230 yuan, the owner of Mr. Wang bought an oil at an auto shop in the urban area. This time, he bought a barrel of oil that rose by 50 yuan, or more than 20%. This is only a microcosm of the current general price increase in Yucheng Auto Parts Market. Affected by the increase in raw materials, the current prices of auto parts of Yucheng repair shop and auto parts store, whether iron, aluminum, or copper, have generally risen. Now. According to a tire dealer from San Francisco, tire prices have recently increased more frequently. In February this year, Hankook Tire increased the price of tires sold in the Chinese market by 5% to 8%. At the same time, Continental Group, which produces horse brand tires, has also made slight price increases for its tires. In March, Bridgestone also raised the price of passenger cars and truck tires, and the price increase ranged from 3% to 5%. Yokohama tire prices rose 5% to 6% in May. Recently, Michelin announced a price increase, and they have received notice of a rise in tire prices since June. Michelin, Warriors, and Bai Luchi have risen between 3% and 7%. According to the purchasers from other urban repair factories in the city, in March this year, although the city`s auto market saw a significant price reduction, it had no effect on the price of accessories. On the contrary, the price of spare parts for sale has increased at that time. Some common accessories prices have risen, such as water tanks, crankshafts, electrical appliances and other accessories with relatively small frequency of change, or less than 10%, brake pads prices rose by 10%. Taken together, the vast majority of spare parts prices increased by more than 10%. Battery, lubricating oil rose significantly From the end of last year to the beginning of May this year, the prices of various accessories have been gradually increased. In this wave of parts and accessories prices, batteries, lubricants, brake pads, oil filters, air filters and air conditioning filters are commonly used. The price of accessories has risen most significantly. Among them, lubricating oils have different price ranges, and the rate of increase varies. The lubricating oil below 50 yuan will rise around 5%, the increase over 100 yuan will be about 10%, and the increase over 200 yuan will be 20% to 30%. The price of the filter is priced at 2-3 yuan for an average price of 15 yuan or less, and the price of antifreeze is 20%-30%. In addition, the increase in wearing parts such as fasteners, hoods, and exterior parts also exceeded 20%. According to the summer master of a repair shop on Sancha Road, except for lubricating oil, the battery has the most significant increase in this price increase. Taking the battery of a Hongyan brand as an example, the price was 350 yuan at the end of last year and rose to 450 yuan in February of this year. After three times of price adjustment, it increased by 20-50 yuan each time. At present, the price of the battery is about 550 yuan. Compared with last year's price, this kind of storage battery has increased by more than 50%. Compared with last year, the battery of other brands rose more than 20%-50%.

The problem that should be paid attention to all parts of the standard six-seat car is that the car must have a large range of maintenance after it is bought. However, you may not know where it needs to be maintained. The car will explain the car for you today. Train maintenance tips. The daily maintenance of the carriages during driving is very important, especially the year-end maintenance. The year-end is a summary of this year, and the carriages also need to be comprehensively maintained and relatively comprehensive. So, what do you need to pay attention to when year-end maintenance of the cabs is required? Here's a brief introduction for everyone. A battery In winter, the car's power consumption is much greater than in other seasons. First of all we have to take care of the battery of the carriage so as not to start a fire at startup. For vehicles that are not maintenance-free, if the battery is used for a long time, the battery should be sent to the repair shop for a thorough charge to keep the battery in a good working condition. The average battery life is two to three years. If the vehicle has reached the end of its useful life, it is advisable to replace it in advance especially for automatic models. Second, the filter Most regions of China are windy and dry in winter, and the wind is often accompanied by small sand grains. The air is formed on the cylinder wall behind the air cylinders to accelerate the wear of the cylinders, and it adheres to the oil and accelerates the deterioration of the oil. Therefore, the dust on the air filter must be cleaned every 5000 km. Some manufacturers require that 10,000 kilometers or even 15,000 kilometers can be used as a maintenance cycle. In fact, this is the maximum. 4S stores still recommend maintenance of 5,000 kilometers or 7,500 kilometers. This is indeed justified. Third, the engine Checking whether the temperature of the car's engine is normal is actually checking the opening of the thermostat. Whether the temperature of the engine is too high or too low, the wear of the engine will be exacerbated. Some low-end models are not easy to catch fire in the winter, and even the central control locks have frozen dead, so hot cars are also necessary in the winter. The biaxial single-tire carriage, ie, the rear axle has a biaxial structure, each axle has 2 tires and a total of 4 tires. The axle of this structure is designed as a concave bridge, so that the porous plate above the axle is very low from the ground, increasing the loading space. The twin-axle double-ticket type carriage is a two-axle structure with four rear axles and a total of eight tires. The axle of this structure is designed as an ordinary axle and adopts a reversed-mounted suspension device. As a result, the porous plate above the axle is very high from the ground, generally 1250mm, and the loading space has an effect, but the carrying capacity increases. Shandong Hongsheng Vehicle Special Purpose Manufacturing Co., Ltd. provides professional, comprehensive special car prices, semi-trailer pictures. Hongsheng Specialist Automobile sells all over the country, with professional direct sales centers, sales departments and online sales centers in major provinces and cities. Sales personnel cover all major provinces and cities in the country and provide door-to-door service for customers. Fourth, tires Pay attention to checking the tire pressure of the spare wheel of the truck and see if there are any cracks, damages, or bulging packets on the plastic tire wall. If you have any of the above conditions, you must go to a professional service station immediately. The elasticity of rubber in winter is reduced, so the tires are more prone to cracks and other conditions, requiring the owner to pay more attention. Tyre lighter models need to be replaced in time to improve grip. The above content by our Shandong Hongsheng car manufacturers to tell everyone about the various parts of the car should pay attention to the problem, if you want to learn more about the information on the car, please inquire! There are friends who want to buy a cab. Get in touch with us! We will bring more knowledge of the carriage to everyone. If you have questions about the carriage, we will answer them.

Abstract "scrapped vehicle recycling dismantling regulations (draft)" (hereinafter referred to as "draft") The most important change, there are two, one is to improve the business of scrap cars dismantling barriers to entry; and second, In the original management method, it should be handed over to the steel enterprise as the smelting original. Car Spare Parts There are two most important changes in the Regulations on the Management of Recycling and Dismantling of Scrapped Motor Vehicles (Draft for Comment) (hereinafter referred to as the [Draft for Comment"). One is to increase the barriers to entry for dismantled vehicles; the second is in the original The five major assemblies that should be handed over to the steel company as a raw material for smelting in the management method were modified and allowed to be handed over to the remanufacturing company for manufacturing. Auto Spare Parts Although the "Draft for Comment" regulates the scrap car recycling industry, the more important significance is to kick off the prelude to promote the remanufacturing industry in China. Great Wall Auto Parts ■The government pushes the remanufacturing industry Haval Auto Parts Before the publication of the "Draft for Comment", 11 ministries and commissions including the National Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Finance, the Ministry of Environmental Protection, and the Ministry of Commerce have jointly issued the "Opinions on Promoting the Development of the Remanufacturing Industry", proposing the future remanufacturing of China. The key areas of industrial development hope to deepen the pilot of auto parts remanufacturing. Wingle Auto Parts Previously, China had announced the [Management Measures for Pilots of Automobile Parts Remanufacturing" for the first time in 2008, and identified 14 auto companies as re-manufacturing pilot enterprises, among which China FAW, Jianghuai and Chery were among the three vehicle manufacturers. . At the same time as the "Draft for Comment" was issued, the "Regulations on the Remanufacturing of Auto Parts" and the "Re-manufacturing Industry Catalogue" led by the National Development and Reform Commission were also formulated and catalogued during the same period. When the subsequent relevant policies are implemented, the remanufacturing industry will enter a development period under the government's vigorous promotion. The revision of the "Administrative Measures for the Recycling of Scrapped Vehicles" will be the prelude to this development period, because the "Draft for Comment" first solves a flaw in the remanufacturing of auto parts, so that it is no longer "no rice." "The situation." ■ Remanufacturing market receives foreign investment Although China identified 14 companies as pilot enterprises for parts and components remanufacturing in 2008, including three vehicle manufacturers. However, the reporter contacted Jianghuai and Chery yesterday. I would like to know about the remanufacturing of parts and components in the past two years, and I have not received a positive response from the other side. In the industry's view, this situation is normal, because if the current "Recycling Vehicle Recycling Management Measures" these re-manufacturing pilot companies simply do not have "raw materials." The industry insider Li Lizhen believes that in the field of auto parts, China has such a regulation: scrapped car recycling companies must dismantle the scrapped cars, and disassemble the car engine, steering gear, transmission, front and rear axles, and the frame. The assembly should be sold as scrap metal to steel companies as a raw material for smelting. That is to say, scrapped cars, one of the largest sources of raw materials for the remanufacturing industry, have been blocked by policy – although the original intention of the policy was to regulate the market. In addition to the three vehicle manufacturing enterprises, it also includes some parts and components manufacturers such as Weichai, Yuchai and China National Heavy Duty Truck Group Jinan Fuqiang Power. Jinan Fuqiang Power has been engaged in and promoted the re-engineering of the engine. However, its supply mainly comes from the maintenance market of China National Heavy Duty Truck. For heavy-duty engines that have entered the overhaul or overhaul state, they will replace the high-quality, high-standard users at the most favorable price. The remanufactured engine and offers the same three-pack service as the new engine. Although China's remanufacturing industry has not yet developed vigorously, its huge market has attracted the attention of foreign companies. China National Heavy Duty Truck Jinan Fuqiang Power in the pilot enterprise was established by a joint venture between China National Heavy Duty Truck Group and a British company, and Caterpillar (China) Investment Co., Ltd., a subsidiary of Caterpillar Inc., was established as a joint venture with Yuchai in the pilot enterprise. A company that provides remanufacturing services for Yuchai diesel engines and components, as well as some Caterpillar diesel engines and components. Dongfeng Cummins also signed a re-manufacturing project cooperation agreement with Cummins earlier.

The automotive industry has become a global focus in recent years. Major manufacturers have actively deployed and relocate their production bases to the planned market or neighboring regions to reduce production costs and enhance competitive advantages, prompting more and more international auto companies to set up joint venture companies in mainland China. , to bring business opportunities to parts suppliers in the region. In the favourable market environment, the first "Hong Kong International Auto Parts Exhibition" will be held from April 8 to 11, 2006 at the AsiaWorld-Expo. Adjacent to the Hong Kong International Airport's AsiaWorld-Expo is the newest largest convention and exhibition venue in Hong Kong. . Car Spare Parts The exhibition is jointly organized by the Hong Kong Trade Development Council, Infocom Exhibition Company and the Hong Kong Electronics Industry Association. It is also supported by the Hong Kong Productivity Council, the Federation of Hong Kong Industries, the Hong Kong Automobile Parts Industry Association, the International Society of Automotive Engineers, the Hong Kong Regional Chapter, and Hong Kong. The Die Casting Society and the Hong Kong Machinery & Metals Industry Federation will give their full support. Great Wall Auto Parts Huang Li, a senior manager of the Hong Kong Trade Development Council, said: [Hong Kong is an important procurement and information exchange center for auto parts in Asia. In fact, the re-export of auto parts in Hong Kong accounts for nearly 98% of total exports. Hong Kong companies have advanced technology, With excellent marketing capabilities and professional service levels, domestic companies can develop overseas markets by virtue of favorable conditions in Hong Kong and a wide range of customers. In addition, Hong Kong recently signed a memorandum of understanding with Geely Automobile Holdings Co., Ltd. to develop the first batch of [Hong Kong-manufactured" passenger vehicles. And related auto parts projects laid the foundation for development. Haval Auto Parts Under the agreement, the Hong Kong Productivity Council and the forthcoming establishment of an auto parts R&D center will work closely with Geely to jointly implement a variety of engineering designs and auto parts development plans. Hong Kong manufacturers will cope with the needs of the plan and develop core components. Wingle Auto Parts From a market perspective, consumers are increasingly paying attention to passenger safety, driving performance and environmental protection. These will be new ideas for the concentrated development of spare parts suppliers; the main strategy of manufacturers will be research and development with different value-added functions and Characteristic product. Auto Spare Parts The Hong Kong International Auto Parts Exhibition is rich in variety and will open up more space for the industry to purchase. The main exhibit categories include automotive and motorcycle parts, automotive electronics, automotive and parts manufacturing, maintenance and performance parts, automotive beauty, automotive testing and trade services. Chen Qichen, chairman of the Hong Kong Electronics Industry Association, pointed out: "Hong Kong exports a large variety of auto parts and related products, among which high-grade car audio products and anti-theft systems are becoming more and more popular in the market." Car Engine Parts He said: "Hong Kong's advanced electronics industry, together with its superior molding technology, global sales network and marketing experience, have driven the continuous development of the auto parts industry. Hong Kong plays a very important role in the global automotive production supply chain." Car Electrical Parts About half a year from the show, there are now nearly 100 Hong Kong companies and about 100 companies from the Mainland. In addition, the Changchun City Government will also organize the "Changchun Pavilion" to participate in the exhibition. The organizers will also invite buyers from the United States, Japan, the Middle East, Europe, Canada, Australia, South Africa, Turkey and Iran to visit. Hong Kong is an important trade center in Asia and a barrier to entry into overseas markets. The first auto parts exhibition will further consolidate Hong Kong's role as a procurement center for auto parts, and will open up new markets for the industry to enter the market.

Sino-Foreign Sinaite (Cangzhou ) Rubber Item Co,. Ltd, located in the beautiful plain of North China, Bohai lake. North of Beijing, ferry, south of Shandong, fifty km Beijing-Shanghai, Beijing-Kowloon, Shuohuang railway artery through; to the Beijing-Shanghai high-speed, high-speed, 307 National Road from 106, encircle, geographic location, convenient transportation. Car Auto Parts The company was established in 1999, the introduction of the American-Korean technology and production lines, has now become the production of auto accessories enterprises. The company covers an area of 9900 square meters, 120 employees including 2 senior engineers, technical personnel more than 10 people; the company now has total assets of 3500000, annual output value of 8600000 yuan. Auto Spare Parts Car Engine Parts The company has the most advanced cold-patches, balance weights production line, product quality reach the national technical standards. The company production of bicycles, motorcycle inner tube cold patches Units; motorcycle, automobile universal tube repair patches units; radial tire repair patches units ; incline rubber tyre repair patches ; tire repair seals , balance weights, Plugging tools, Tire repair tools and other series of more than 100 kinds of specifications of mouth marketing the country 24 provinces and autonomous regions, and exported to Southeast Asia, Europe and the United States other countries. Excellent product quality to win the majority of users of praise. Great Wall Auto Parts With China's automobile industry rapid development, Sinaite company and when a progressive, pioneering and innovative, better services for the automotive industry. Haval Auto Parts

Chengdu Hotel [one room is hard to find" Car Spare Parts At 3 o'clock on the 27th, the Sheraton Hotel staff told reporters that the current hotel reception capacity is about 450 people, almost full. Not only Sheraton, Shangri-La and other star-rated hotels are popular, but ordinary hotels and business hotels along the Century City·New Exhibition Center are also full. Auto Spare Parts According to the 114 number of the staff, the number of people who recently called to ask for hotel accommodation is very large. The hundreds of hotels that cooperated with 114 were very nervous from October 27 to 31. At present, only the Holiday Inn around Century City has some luxury suites on the 27th. Great Wall Auto Parts Merchants from all over the world have also become a new force in the Chengdu consumer market. On the 27th, the reporter found that the star-rated hotels in the city were full, the taxi business Haval Auto Parts The passenger flow in the scenic spot has increased significantly Wingle Auto Parts As usual, after the "11", the passenger flow will be significantly reduced. However, the relevant person in charge of the Sands Museum recently found that the number of passengers in the exhibition area increased significantly. After investigation, it was found that most of the visitors were medical exhibitors. Car Engine Parts

In 2003, China`s auto parts sales revenue reached 300 billion yuan, and its total profit was 23.9 billion yuan, an increase of 46.86% year-on-year. Auto parts exports reached US$4.31 billion, an increase of 32.1%. Wingle Auto Parts In 2004, the supporting scale of China's auto parts reached 440 billion yuan. Haval Auto Parts In 2005, China`s auto parts and components sales revenue was 403.5 billion yuan, accounting for 33.9% of the total sales revenue of the automotive industry; its total profit was 23.6 billion yuan, accounting for 44.9% of the total. From 2000 to 2005, the total profits and taxes realized by auto parts companies increased by 20.55% annually. In 2005, auto parts exports reached 8.947 billion U.S. dollars, a year-on-year increase of 22.82%. Great Wall Auto Parts According to the plan of the Ministry of Commerce, the total export of auto parts in China will exceed 20 billion U.S. dollars by 2006, and this figure will reach 100 billion U.S. dollars by 2010. Auto Spare Parts According to statistics, in 2002 China's spare parts industry realized sales revenue of 124.75 billion yuan, and realized a total profit of 10.63 billion yuan. Exports of parts and components do not include engine exports of 2.21 billion U.S. dollars, accounting for 73.2% of the total export value of 3.36 billion U.S. dollars for the same year, while vehicle exports only accounted for 7.4% of the total exports for the year. In 2002, the number of auto parts exports without engines increased by 35.41% over the previous year. Car Engine It seems that China's auto parts industry has been accompanied by a continual step-by-step development of disputes, gains and losses. Car Electrical Parts

The 4th China (Zhengzhou) Car Spare Parts International Abrasives Grinding Exhibition will be held at the Zhengzhou Auto Spare Parts International Convention and Exhibition Center from September 14th to 16th, 2017. The exhibition was co-sponsored by Zhengzhou Municipal People's Government, Guoji Precision Co., Ltd. and China Machinery International Cooperation Co., Ltd., taking...Great Wall Auto Parts Haval Auto Parts The 4th China (Zhengzhou) International Abrasives Grinding Exhibition will be held at the Zhengzhou International Convention and Exhibition Center from September 14th to 16th, 2017. The exhibition was co-sponsored by Zhengzhou Municipal People's Government, SINOMACH Precision Co., Ltd. and China National Machinery International Cooperation Co., Ltd., and adopted a market-oriented operation mode. It is a grand gathering of abrasives and abrasives industry at home and abroad. It is estimated that the exhibition area will be 30,000 square meters, and there will be about 400 exhibitors at home and abroad. Wingle Auto Parts

Car Spare Parts In 2003, China`s auto parts sales revenue reached 300 billion yuan, and its total profit was 23.9 billion yuan, an increase of 46.86% year-on-year. Auto parts exports reached US$4.31 billion, an increase of 32.1%. Car Engine Parts In 2004, the supporting scale of China's auto parts reached 440 billion yuan. Auto Spare Parts In 2005, China`s auto parts and components sales revenue was 403.5 billion yuan, accounting for 33.9% of the total sales revenue of the automotive industry; its total profit was 23.6 billion yuan, accounting for 44.9% of the total. From 2000 to 2005, the total profits and taxes realized by auto parts companies increased by 20.55% annually. In 2005, auto parts exports reached 8.947 billion U.S. dollars, a year-on-year increase of 22.82%. Great Wall Auto Parts According to the plan of the Ministry of Commerce, the total export of auto parts in China will exceed 20 billion U.S. dollars by 2006, and this figure will reach 100 billion U.S. dollars by 2010. Car Auto Parts According to statistics, in 2002 China's spare parts industry realized sales revenue of 124.75 billion yuan, and realized a total profit of 10.63 billion yuan. Exports of parts and components do not include engine exports of 2.21 billion U.S. dollars,Wingle Auto Parts accounting for 73.2% of the total export value of 3.36 billion U.S. dollars for the same year, while vehicle exports only accounted for 7.4% of the total exports for the year. In 2002, the number of auto parts exports without engines increased by 35.41% over the previous year. Haval Auto Parts It seems that China's auto parts industry has been accompanied by a continual step-by-step development of disputes, gains and losses.

Car Spare Parts Simis is the production of high wear resistant manganese steel castings, high hardness, good toughness, as many as hundreds of varieties, welcome to order. Simis is specialized in producing crusher wear parts, the production of jaw crusher, crusher liner plate,hammer crusher rotor,crusher rolling acetabular wall, crusher roll skin and other accessories made of high manganese steel, high chrome material, the use of advanced casting process from production, quality and cheap, Praised by users, welcome to order crusher wear parts. Auto Spare Parts Car Engine Parts When you want to buy Simis manganese steel crusher parts, please contact us now and we will provide best service for you. We are online 7*24 hours, you can chat us at any time. Choose Simis crusher parts manufacturer, you choose the best crusher parts supplier. Car Auto Parts Haval Auto Parts Manganese steel crusher parts are very popular crusher wear parts, because it is more wear-resistant and longer life.Simis manganese steel crusher parts include manganese steel jaw plates, manganese steel blow bars, manganese steel cone concave and mantles, manganese steel crusher liner plates and so on. Our manganese steel crusher parts have been exported to many countries, such as India, Germany, Australia, South Africa, Russia, Indonesia, USA ect. Great Wall Auto Parts

Content As one of the major projects in Xi'an Cummins, the first case of cooperation by the Chinese joint venture with Cummins Cummins Parts Operations Car Spare Parts warehousing and logistics center - Xi'an Cummins total pre library has begun operations. The Xi'an Cummins Fittings Front Store is located in Xi'an Dili Logistics Park. The warehouse covers an area of 2,100 square meters. You haven't registered yet? Or not logged in? This article requires at least registered users of this site to read! If you haven't registered yet, please register now! If you are already registered but have not yet logged in, please log in here! In order to care for every Car Engine Parts and allow customers to get intact parts, Xi'an Cummins Auto Spare Parts Front Store Operation team designed more professional parts packaging for Xi'an Cummins Parts. Xi'an Cummins exclusive parts packaging fit Xi'an Cummins pure accessories design, well-designed packaging size, selection of good quality packaging materials, plus the improvement of the packaging process, only to find a perfect destination for every Xi'an Cummins parts, so that Cummins parts better service to customers! The establishment of the Xi'an Cummins Fittings Front-end Warehouse is unprecedented in the entire Cummins system. This is Cummins's first joint-stock plant and the Cummins Global Parts Business Unit's spare parts warehouse logistics center since it started operations in China. Together, they created a total front storehouse for Xi'an Cummins. Integrate high-quality resources in the industry, and gather senior industry elites to achieve service commitments, only to allow customers to truly experience the "fast, proactive, full-scale" Xikang services.

According to the "Automotive Industry Report 2009", if the maximum value of the international competitiveness of the developed country's auto industry is set to 100, the Chinese auto industry's international competitiveness score in 2007 was only 52.83, an increase of 10.9% year-on-year. If only compared with the most developed Germany in the automotive industry, the German automotive industry's international competitiveness score was 81.16 in 2007, while China's score was 51.10, which is only 63% of the German score. Car Spare Parts.Auto Spare Parts.Car Engine Parts.Engine Auto Parts.Car Auto Parts.Car Engine Great Wall Auto Parts.Haval Auto Parts.Wingle Auto Parts Although as of the first half of this year, China deserved to become the world`s largest auto consumption power, the overall level of China`s auto industry`s international competitiveness still remains a big gap with the developed countries. After achieving high growth rates of nearly 50% and over 32% in 2009 and 2010, respectively, in the first quarter of 2011, the growth rate of China's light vehicle sales fell sharply to 9%, while the growth rate in April fell to 3%. The introduction of government stimulus policies and the implementation of new car restriction policies in major cities have made the Chinese auto market lack of growth.